Coring preparation, preservation, and handling Research Paper

Coring preparation, rescue, and handling - Research Paper suitWhen seeking to form a description of a consequence, it is essential that one place the lay step to the fore of the core on a table. This exit be essential in checking the amount of the core and comparability it to the coring report so as to ensure no core material was lost during the transportation bear upon (Fjar, Holt, Raaen, Risnes, and Horsrud 125).In case of any alterations or damage, it is important to note such details. The numbering placed on the containers should be noted against the cumulative depth reported. This then creates a better understanding of the core, and offers a contingency to check on the orientation and continuity with respect to the top of the core. If the records show the downhole gamma-ray logs, then it would be wise to verify the same by comparing the to the core gamma-ray logs. This verifies the consistency of the cored interval depths with the log depths. The core features such as composition, texture, color, and porosity types should also be noted. After getting this information, the cutting of stabilized or unstabilized cores will depend on the plug sample methods or the plunge cut technique. This will prepare it for preservation (Fjar, Holt, Raaen, Risnes, and Horsrud 127).The purpose of preservation is to maintain the chemical and physical properties inherent in the cores as close as possible to the reservoir data. The impact noted should be in relation to the intended utility of the core afterwards. The failure to create an impermeable barrier around the sample could lead to wettability alterations, loss of interstitial water, precipitation of the salts, and damage to the mineral fabric (Morton-Thompson and Woods 105). The methods of preservation differ depending on the intended achievements. Six methods require been developed which include sealing the core in airtight metal-cans, dry ice freezing, plastic infrastructure seals, using plastic, steel, o r aluminum tubes to seal, wrapping in plastic tape or metal foil, as well as using plastic coatings. Notably,